top of page

The

lite

System

All lighting options in a 

unified package.

litebar kitchen.png

EASY & PRACTICAL CONTROL

Control your lite lights the easy way.

app on phone.png

App Control

Run your lights off your phone. Use our easy app to set the color, run a schedule, or set a scene. lite can also be controlled by Google home or Alexa. Just set the name and go.

magnetic base switch.jpg

Remote Switch

Our self powered switches don't need to be wired, and will never need a battery. They fit in a standard decora wall plate, and will look just right next to the other switches.

hub control closeup.png

Hub Control

Tune and Dim your lights right on the control hub. Press the built in buttons to set your lighting just right. Use the pair button to connect to wifi or pair a new switch.

Making the connections

Installs in a snap

In addition to being the best lighting available, the lite system is easy to setup and use. With a Control & Power hub combo and wireless switches, lite makes it easy to light up your kitchen.

hub.png
connector.png

lite:SWITCH

lite:HUB

lite:CONNECTOR

#LSF - Fixed mount remote switch

#LSM - Magnetic mount remote switch

#LH72 - Up to 200 inches of lighting

#LH144 - Up to 400 inches of lighting

#LCFxx - 7 connector sizes

#LCFX5 - 5 pack direct connect

Hold the bottom of the switch to increase the brightness of the lights. Hold it again to decrease the brightness. Hold the top of the switch to make the color temperature of the lights warmer. Hold it again to make the color temperature of the lights cooler. Touch either end of the switch to turn the lights on or off.

Wireless switch

Self powered

Standard decora size

Use the DIM & TUNE buttons on the HUB to set the light levels. Hold the button to increase. Hold it again to decrease. Touch either button to turn the lights on or off. The HUB can be plugged into a switched outlet. The HUB will remember the settings if it loses power.

Available in 2 sizes
Plug-in or Hardwire
Includes App control

The Connector wires are needed for plug-in or hardwire applications. Lite:BAR requires a direct connector to link the lights. Insetta comes with a linking connector for each light. The hardwire pigtail connector is required to connect the lights to the hardwire.

Comes in every size
Plug-in or Hardwire
Uses 18/3 jacketed wire

The simple lighting system

Works with

black with yellow e_edited.png
litehub points_edited.jpg

Get Convenience

Get liteHUB.

bottom of page